Milltek Exhaust System, what am I missing?

[Rado16v]

Hi, I recently purchased a used Milltek 2.75" resonated exhaust system which will be mated to the standard cat, pics below







What you see is what I have, I know I'm missing 2 clamps, one between the rear and mid box and the other between the mid box and cat. What size clamps are these from Milltek please? Is there a part number?

Is there anything else, e.g. sleeve? I think that's just if you have a sports cat.

Should I change the exhaust hangers too? How many are there and are they all the same?

Cheers in advance

[Clarkj93]

I've got that exact setup. There is a reducer from the mid silencer to the oem downpipe you need. If you can't source a miltek one should be able to get one somewhere easily enough as long as you have the right size. Just get a caliper and measure the diameter of the pipes and get some decent clamps. Miltek ones are OK but certainly better clamps out there, I upgraded one of them to one of these after it gave way: https://www.ebay.co.uk/itm/114232198106?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=rOoU34-dTe6&sssrc=2349624&ssuid=8yB37yXtQ2a&var=&widget_ver=artemis&media=COPY

It was a while ago and can't remember if that went on them oem side or the milltek side sorry.

[pudding]

Get the updated orange hangers from VW.  They don't sag as much as the original black rubber ones.  There's 3 or 4 I think, can't remember.

[Rado16v]

Thanks guys, that's really helpful.

I came across this thread which also helps
https://www.mk5golfgti.co.uk/forum/index.php?topic=36067.0